Saleen 10-8002-C11790A User Manual download pdf (Page 14)

14

VI Front Struts Installation

Part Number Description Qty.

06-1302-B09913* Strut Front Assembly Coupe

2

Figure 1

Figure 2

Order of Operations:

1. With notch facing outside of the

vehicle, slide studs in top of strut into

four upper mounting holes; be sure

the brake line sits behind strut

assembly before tightening the strut

in place. (Figure 1)

2. Use a 13mm deep socket with the

3/8” impact gun to tighten a nut over

each of the four studs (Figure 5, p. 8).

Torque to 26 ft.-lbs.

3. Pull up wheel hub and attach the

bottom of the strut to the knuckle

using stock bolts and nuts. Use the

3/8” impact gun and 18 mm deep

socket to tighten (Figure 2). Torque

to 148 ft-lbs.

4. Put the sway bar end link stud into

rear most hole on strut tower, tighten

using a ½” impact gun with a 18mm

deep socket. (Figure 3) Torque to 85

ft-lbs.

5. Bolt brake line to rear of strut tower

using 10mm socket and 3/8” impact

gun. (Figure 5)

Obtain the following tools:

• ½” impact gun

• 18mm deep socket, ½” drive

• 3/8” impact gun

• 18mm deep socket, 3/8” drive

• ¼” air wrench

• 13 mm deep socket, 1/4”

drive

• 13 mm deep socket, ½” drive

• 10 mm deep socket, ¼” drive

• Ft-Lb torque wrench, ½”

drive

Figure 3

Rear of

vehicle

End

link

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

P/N: 10-8002-C11790A 1
WELCOME! 3

Comments to this Manuals

No comments