Saleen 10-8002-C11790A User Manual download pdf (Page 19)

19

X Rear Suspension Installation

Part Number Description Qty.

06-1302-C09818 Shock Rear Coupe

2

06-1302-C09819 Spring Rear Coupe

2

Figure 1

Figure 2

Order of Operations:

1. Place the top of the spring (the end with

the shorter vertical distance between

coils) into the mounting location, making

sure the stock rubber boot is in place.

The top of the spring has shortened

vertical distances between the coils.

Install both springs before next step.

Make sure to use the stock rubber boots

on top and bottom of the springs. (Figure

1)

2. Put the bottom of the shock into the

bolting location. With the top lined up

with the trunk hole, tighten bottom of

shock. Decal faces rear fascia. Use a 15

mm socket with a 3/8” impact gun.

(Figure 2) Repeat on other side.

3. Remove the white cover from the shock

decal.

Obtain the following tools:

• 3/8” impact socket

•

15 mm shallow wobbly

socket, 3/8” drive

• Small flat head screw driver

• Needle nose pliers

• 13/16 deep socket, ½” drive

• 10 mm wrench

• Hack saw

• Ft-lb torque wrench, ½” drive

1 2 ... 14 15 16 17 18 19 20

P/N: 10-8002-C11790A 1
WELCOME! 3

Comments to this Manuals

No comments